How To Cover The Arms Of A Sofa Bed With Fabric

How to Cover the Arms of a Sofa Bed with Fabric

When the arms of your sofa bed start looking worn and dull, it can make the whole piece of furniture look drab. But don't worry, reupholstering the arms of a sofa bed is a relatively simple project that can be completed in a weekend. With a little bit of planning and the right materials, you can give your sofa bed a fresh new look that will make it look like new again.

Materials

Before you start, you'll need to gather all of the necessary materials for your sofa bed reupholstery, which includes:

Fabric (enough to cover both arms, plus extra for overlap and shrinkage)
Upholstery foam (if needed)
Staple gun and staples
Scissors
Measuring tape or ruler
Needle and thread (optional)

Instructions

Once you have all of your materials, you can begin reupholstering the arms of your sofa bed. Here are the steps:

1. Remove the old fabric

The first step is to remove the old fabric from the arms of the sofa bed. To do this, use a staple remover to carefully remove all of the staples that are holding the fabric in place. Once all of the staples have been removed, you can peel the old fabric away from the arm.

2. Replace the foam (optional)

If the foam on the arms of your sofa bed is worn or damaged, you may need to replace it before you upholster the arms. To do this, measure the width and height of the arms, and then cut a new piece of foam to fit. Once the new foam is cut, you can glue or staple it to the arms of the sofa bed.

3. Cut the fabric

Next, you need to cut the new fabric to fit the arms of the sofa bed. To do this, measure the width and height of the arms, and then add a few inches for overlap and shrinkage. Once you have the measurements, you can cut the fabric to size.

4. Upholster the arms

Once the fabric is cut, you can begin upholstering the arms. Start by stapling the fabric to the bottom of the arm, making sure that the fabric is taut. Then, staple the fabric to the sides of the arm, working your way up to the top. Once the fabric is stapled to the arm, you can trim any excess fabric.

5. Finish the seams (optional)

If you want to give your sofa bed a more finished look, you can finish the seams by sewing them together. To do this, use a needle and thread to sew the seams by hand or by machine. Once the seams are sewn, you can trim any excess thread.

Tips

Here are a few tips to help you reupholster the arms of your sofa bed:

Use a sharp staple gun to avoid tearing the fabric.
Pull the fabric taut as you staple it to the arm to prevent wrinkles.
Trim any excess fabric carefully to avoid fraying.
If you are not sure how to upholster the arms of your sofa bed, you can always consult with a professional upholsterer.

With a little bit of effort, you can give your sofa bed a fresh new look that will make it look like new again.